Fits 99% of wall mounted toilets in use today, All hardware included, Installs in about 20 minutes, installs without removing toilet, supports a 1000 pound load


The SK1000U (now called The Buttress - click for more) Universal Wall Mounted Toilet Support is crafted out of 1018 low carbon steel which has a Rockwell hardness of B72, a melting point of +2800 degrees Fahrenheit, and has a Yield Strength of 55,000 PSI.

The white coating is a Thermoset powder coated baked on enamel. The process has five steps. A pre-wash, a rust prevention, a pre-heating, powder paint spray, and a +450 degree Fahrenheit curing bake.

Line drawing of toilet supportA rubber wedge bumper is extruded from white commercial grade FDA Buna-N-Rubber. It is non toxic, non allergenic, non marking, and oil resistant. The temperature range is of -25 to +180 degrees Fahrenheit.

The adhesive for the rubber wedge is 3M Scotch VHB 100% acrylic "closed" cell (for infection control purposes) foam tape with a temperature range of -40 to +200 degrees Fahrenheit.

The threaded insert is made of corrosion resistant reinforced polymide with a brass threaded insert. This has a temperature range of -85 to +500 degrees Fahrenheit.

The plastic rivets are of a black Nylon 6/6 with a temperature range to -40 to +170 degrees Fahrenheit.

The plastic end cap is made of black ABS plastic with a temperature range of -60 to +340 degrees Fahrenheit.

The adjustable foot is made out of a yellow zinc plated steel.

The nuts, bolts, and washers are made from 18/8 stainless steel.

Installation Instructions / Diagram

Installation instructions for the SK1000U


Click here for the installation instructions for the SK1000U Toilet Support

The above document is in PDF format and requires the free Adobe Reader


BARIndustries guarantees the SK1000U (now called The Buttress - click for more) Toilet Support to support a 1000 pound load. We will exchange any of our wall mounted toilet supports that have failed due to a manufacturing defect, free of charge. We are not, nor shall we ever be, responsible for cosmetic ‘dings or nicks’ in the finish (powder coating) due to usage nor any corrosion of effected areas. Customer must include our “Return Authorization Number” in order to receive warranty. Customer agrees to pay all shipping costs.

For warranty issues or questions, please call 770-877-9020 or email

We ship same or next day.